Home
      Schedule
      Results
      Points
      Classes & Rules
      Sponsors
      Photos
      Drivers Info
      Forum & Race Links
      About Us
      Contact Info
 
Current Weather for Albany, GA
Click Below for Forecast
Call Us:
1-229-888-4088
www.albanymotorspeedway.net
 
Classes & Rules - Mini Stock
All Classes  •  Late Model  •  Limited Sportsman  •  Pure Stock  •  Enduro  •  Mini Stock

ALBANY MOTOR SPEEDWAY 2011 RULES FOR MINI STOCK

 MINI STOCK

CAR

Any 4 cylinder car or truck.

BODY

A. Body must be stock appearing.

B. May run after market body.  Roof must be stock, no modifications.  No slope noses.

C. Hulling of body ok, but must keep stock firewall and floor pan. Trunk area must be enclosed from drivers compartment.

D. 5" spoiler allowed   May run 3 supports same height as spoiler and 12 inches long.

E. All flammable interiors must be removed.

F. Must have 5-point racing belts.

G. Fire extinguisher required.

H. Fenders may be trimmed.

I. Racing seats required

J. Fuel cells required

 K. No push bars or sharp edges on body or spoiler.

CHASSIS AND SUSPENSION

A. Racing springs allowed front and rear

B. Stock shocks and struts in stock location.  Strut brackets may be slotted.

C. Must be stock chassis.

D. May run screw jacks and adjustable shackles.

WEIGHT

A. Single cam engine 2300 after the race minus 1 lb. per lap burn off.

B. D.O.H.C. engines 2500 lbs after race minus 1 lb. per lap burn off.

C. At technical director's discretion cars maybe required to add weight for modifications, such as oversize cam, or other modifications.

 D. Any modifications to car and/or engine weight after race to be 25oo lbs minus I lb. per lap burn off.

ENGINE

A. Any 4 cylinder. No rotary. No turbo.

B. Engines must be  same type for make and model of chassis.  Engines must be mounted in stock location.

C. No hi-performance engine of any kind.

D. Maximum overbore is 0.60 + 0.10.

E. May run 500 cfm Holley 2 Barrell Carb (unaltered) or Stock Fuel System ONLY.

F. Fuel injection OK.

G. Stock intake for that model car only no alterations allowed.

H. Stock ignition system only

I.Heads must be stock.  No porting or polishing.  Valve springs must be stock.

J. Crankshaft, rods, and pistons must be stock. 

K.Ignition system must be stock.

CAMSHAFT
A. Stock type or OEM flat tappet hydraulic camshaft ONLY. NO roller cams or solid tappet cams.

B. After market camshaft allowed.

C. Stock valve springs ONLY.     

DRIVE TRAIN

A. Rear end must be strictly stock in make and model. Locked rear end OK.

B. Any gear

C. Must have stock transmission for make and model.

D. All gears must work.

E. Must run stock brake system.  Aftermarket pedals with one master cylinder ok.  Brakes must be operable on all 4 wheels.  No brake bias valves or right front shut off valve.

CLUTCH

A. Stock type clutch ONLY.

B. No aluminum flywheels.

C. No direct drives.

EXHAUST

A. Can run economy header. Must have mufflers.

FUEL

A. Pump gas.

B. Stock fuel pump only

WHEELS AND TIRES

A. 8" steel wheels only

B. 8 x 13 racing tires allowed


 

Home  l  Schedule  l   Results  l  Points  l  Classes & Rules  l  Sponsors  l  Photos  l  Drivers Info  l  About Us  l  Contact Info
Copyright © Albany Motor Speedway. All Rights Reserved. Web design and services by WebGraffix Media Solutions, LLC